GitLab Skill (Kiro CLI)

Use the glab CLI to interact with GitLab. Supports seven MR workflows (Create → Update → Read → Review → Fix → CI Fix → Feedback) plus general glab operations.

URL Parsing

When given a GitLab MR URL like https://gitlab.com/group/subgroup/project/-/merge_requests/42:

• repo_ref: strip https:// and everything from /-/ onward → gitlab.com/group/subgroup/project
• mr_id: extract the number after merge_requests/ → 42

These two values power most glab commands: glab mr <cmd> <mr_id> --repo <repo_ref>

Intent Detection

Determine the user's intent before selecting a workflow. There are seven distinct workflows — Create creates a new MR from the current branch, Update updates an existing MR's description, Read is the lightest (just summarize), Review runs full specialist agents, Fix reviews then implements, CI Fix targets pipeline failures, and Feedback addresses reviewer comments. Default to Read when the user provides a MR URL with no strong signal indicating they want more.

Signal in User Request	Workflow
"สร้าง MR", "create MR", "open MR", "เปิด MR", "สร้าง merge request"	MR Create — create a new MR from the current branch with comprehensive description
"อัพเดท MR", "update MR", "update description", "แก้ description", "อัพเดท description"	MR Update — update MR description to reflect latest changes
"อ่าน", "ดู", "check", "สรุป", "summary", bare URL with no action verb	MR Read — fetch MR info + diff, then summarize. No specialist agents.
"review", "ตรวจ", "ช่วย review", "review ให้หน่อย"	MR Review — full code/security/QA review via 3 parallel specialist agents, post findings as comment
"แก้", "fix", "แก้ตาม", "แก้ issue", "implement", "ทำตาม"	MR Fix — review first, then ask user to invoke /neo-team-kiro to implement fixes
"fix CI", "fix pipeline", "แก้ pipeline", "pipeline fail", "CI fail", "build fail"	MR CI Fix — fetch failed job logs, analyze, ask user to invoke /neo-team-kiro to fix
"address feedback", "แก้ตาม comment", "แก้ตาม feedback", "resolve threads", "ตอบ review"	MR Feedback — parse unresolved review threads, implement fixes, resolve

Decision rule:

1. If the user's message asks to create/open a new MR (no existing MR URL) → MR Create
2. If the user's message asks to update MR description or mentions "อัพเดท MR" → MR Update
3. If the user's message mentions CI/pipeline failure → MR CI Fix
4. If the user's message mentions feedback/comments to address → MR Feedback
5. If the user's message contains a fix/แก้ keyword (not CI/feedback-specific) → MR Fix
6. If the user's message explicitly says "review" or "ตรวจ" → MR Review
7. Everything else (bare URL, "อ่าน", "ดู", "check", "สรุป", or ambiguous) → MR Read (lightest option, no side effects)

---

Specialist Reference Files

This skill delegates review work to three specialist agents. Their detailed instructions live in the neo-team-kiro skill's reference files. Before spawning review agents, read these files with fs_read:

Specialist	Reference File
Code Reviewer	.agents/skills/neo-team-kiro/references/code-reviewer.md
Security	.agents/skills/neo-team-kiro/references/security.md
QA	.agents/skills/neo-team-kiro/references/qa.md

---

MR Create Workflow

Create a new MR from the current branch. No MR URL is needed — this workflow detects the current branch and creates a MR targeting the default branch.

1. Verify current branch and uncommitted changes
2. Push branch to remote if needed
3. Analyze changes & generate comprehensive description
4. Create MR with generated description
5. Report MR URL to user

Step 1: Verify Branch

git branch --show-current
git status --short

If there are uncommitted changes, warn the user and ask whether to proceed or commit first. If the current branch is main or master, warn the user — they likely need to create a feature branch first.

Step 2: Push Branch

git push -u origin <current_branch>

If the branch is already pushed and up to date, skip this step.

Step 3: Analyze Changes & Generate Description

Before creating the MR, analyze all changes on the branch to write a comprehensive description. This is the key step — the description must fully capture what was done so reviewers understand the MR without reading every line of diff.

# Detect target branch
git remote show origin | grep 'HEAD branch'

# All commits since diverging from target
git log <target_branch>..HEAD --format="%h %s"

# File change summary
git diff <target_branch>...HEAD --stat

# Full diff for detailed analysis
git diff <target_branch>...HEAD

From the commits and diff, generate a structured MR description:

## Summary
<1-2 sentences: overall purpose of this MR — what problem it solves or what feature it adds>

## Changes
<grouped by area — e.g., Features, Refactoring, Bug Fixes, Config, Tests, Docs>
- <concise description of each change>

## Files Changed
<key files with what changed in each — not every file, focus on the important ones>

The description must accurately reflect what the commits and diff show. Read the actual code changes — do not just paraphrase commit messages. If commits are messy or unclear, the description should still be clear and well-organized based on what the diff reveals.

Step 4: Create MR

glab mr create --remove-source-branch --squash-before-merge \
  --title "<title>" --description "<generated_description>"

• Generate the title from the branch name or commit messages (concise, under 70 chars)
• Use the description generated in Step 3
• --remove-source-branch deletes source branch after merge (team default)
• --squash-before-merge squash commits when MR is accepted (team default)
• If the user provides a title, description, or other options (assignee, reviewer, target branch), use theirs instead of generating

Step 5: Report

After creation, show the user the MR URL and key details:

✅ สร้าง MR สำเร็จ
- MR: !<mr_id> — <title>
- Branch: <source> → <target>
- URL: <mr_url>
- Delete source branch: ✅
- Squash commits: ✅

---

MR Update Workflow

Update an existing MR's description to reflect the latest changes. Use when additional commits have been pushed after the MR was created, or when the user wants a better description.

1. Identify MR (from URL or current branch)
2. Fetch current MR info
3. Analyze all changes on the branch
4. Generate updated description
5. Update MR and report

Step 1: Identify MR

If the user provides a MR URL, parse it. Otherwise, find the MR for the current branch:

glab mr list --source-branch $(git branch --show-current) --state opened

Step 2: Fetch Current MR Info

glab mr view <mr_id> --repo <repo_ref> --output json

Extract the current description and target branch.

Step 3: Analyze All Changes

Analyze the full set of changes on the branch — not just the new commits, but everything since diverging from the target branch:

# All commits on the branch
git log <target_branch>..HEAD --format="%h %s"

# File change summary
git diff <target_branch>...HEAD --stat

# Full diff
git diff <target_branch>...HEAD

Compare with the existing MR description to understand what's new or changed since the description was last written.

Step 4: Generate Updated Description

Write a new description covering ALL changes (original + new), using the same structure as MR Create Step 3:

## Summary
<updated overall summary reflecting the full scope>

## Changes
<complete grouped list of all changes>

## Files Changed
<updated file list>

Do NOT just append new changes to the old description — rewrite the entire description to be coherent and comprehensive. The description should read as if it was written fresh for the current state of the branch.

Step 5: Update MR and Report

glab mr update <mr_id> --repo <repo_ref> --description "<updated_description>"

Report:

✅ อัพเดท MR description สำเร็จ
- MR: !<mr_id> — <title>
- สิ่งที่เพิ่มเติม: <brief summary of new changes detected since last description>
- URL: <mr_url>

---

MR Read Workflow

The lightest workflow — no specialist agents, no comments posted. Just fetch MR data and present a concise summary to the user in the conversation.

1. Fetch MR info (JSON) and diff
2. Summarize in conversation

Step 1: Fetch

glab mr view <mr_id> --repo <repo_ref> --output json
glab mr diff <mr_id> --repo <repo_ref>

Step 2: Summarize

Present a concise Thai summary covering:

• MR metadata — title, author, status, source → target branch, pipeline status
• What changed — brief description of the changes (group by area: features, refactoring, CI, docs, tests)
• Files changed — count and key files
• Existing comments — if there are review comments, briefly note them

Keep it terminal-friendly and scannable. Do NOT spawn specialist agents or post any comments on the MR.

---

MR Review Workflow

When the user asks to review a MR (or intent is detected as "review"), run this pipeline:

1. Fetch MR info, diff, and existing comments
2. Read & summarize existing comments (understand what's already discussed)
3. code-reviewer + security + qa → review in PARALLEL (with comment context)
4. Compose Thai comment from template
5. Post comment to the MR

Step 1: Fetch

glab mr view <mr_id> --repo <repo_ref> --output json
glab mr diff <mr_id> --repo <repo_ref>
glab mr note list <mr_id> --repo <repo_ref>

Extract from the view output: MR title, source branch, target branch, author.

Step 2: Read Existing Comments

Before diving into the review, read through all existing MR comments/notes fetched in Step 1. This gives crucial context — other reviewers may have already flagged issues, the author may have explained design decisions, or there may be ongoing discussions that affect how you should review. Summarize the key points:

• Issues already raised by other reviewers
• Author's explanations or decisions
• Unresolved discussions that need attention
• Resolved items (avoid duplicating feedback)

This prevents the review from repeating what's already been said and helps focus on gaps that haven't been addressed yet.

Step 3: Parallel Review

Read the project's CLAUDE.md or project conventions file if available. Then read the three specialist reference files listed above, and spawn all three subagents at the same time — including a summary of existing comments so reviewers have full context:

{
  "command": "InvokeSubagents",
  "content": {
    "subagents": [
      {
        "query": "# Role: Code Reviewer\n[paste full code-reviewer instructions from .agents/skills/neo-team-kiro/references/code-reviewer.md]\n\n---\n## Project Conventions\n[relevant sections from conventions file if available, else omit]\n\n---\n## Existing MR Comments\n[summary of existing comments from Step 2]\nDo NOT repeat issues that other reviewers have already flagged unless you have additional insight to add.\n\n---\n## Task\nReview the following MR diff for convention compliance.\n\nMR: !<mr_id> — <mr_title>\nBranch: <source> → <target>\n\n## Diff\n<full diff output>",
        "relevant_context": "Code review specialist"
      },
      {
        "query": "# Role: Security Reviewer\n[paste full security instructions from .agents/skills/neo-team-kiro/references/security.md]\n\n---\n## Existing MR Comments\n[summary of existing comments from Step 2]\nDo NOT repeat security concerns that have already been raised unless you have additional findings.\n\n---\n## Task\nSecurity review the following MR diff.\n\nMR: !<mr_id> — <mr_title>\nBranch: <source> → <target>\n\n## Diff\n<full diff output>",
        "relevant_context": "Security review specialist"
      },
      {
        "query": "# Role: QA Reviewer\n[paste full QA instructions from .agents/skills/neo-team-kiro/references/qa.md]\n\n---\n## Project Conventions\n[relevant sections from conventions file if available, else omit]\n\n---\n## Existing MR Comments\n[summary of existing comments from Step 2]\nDo NOT repeat QA concerns that have already been raised unless you have additional findings.\n\n---\n## Task\nQA review the following MR diff. Focus on:\n- Test coverage gaps (are new code paths tested?)\n- Missing edge case tests\n- Regression risks\n- Acceptance criteria validation (if available)\n\nMR: !<mr_id> — <mr_title>\nBranch: <source> → <target>\n\n## Diff\n<full diff output>",
        "relevant_context": "QA review specialist"
      }
    ]
  }
}

Step 4: Compose Thai comment

Read references/mr-review-template.md and fill in findings from all three agents (code-reviewer, security, qa).

Step 5: Post

glab mr note <mr_id> --repo <repo_ref> -m "<thai_comment>"

If glab is not authenticated or fails, output the review in the conversation instead and tell the user.

---

MR Fix Workflow

When intent is detected as "fix" (user wants to fix issues from a MR), run review first then hand off to /neo-team-kiro for implementation.

1. Fetch MR info, diff, and existing comments          (same as MR Review Step 1)
2. Read & summarize existing comments                   (same as MR Review Step 2)
3. code-reviewer + security + qa → review in PARALLEL   (same as MR Review Step 3)
4. Compile findings into structured handoff context
5. Ask user to invoke /neo-team-kiro with compiled findings
6. Post summary comment on MR (after fix is done)

Steps 1-3: Same as MR Review

Run the exact same fetch → read comments → parallel review pipeline. The only difference is what happens after.

Important for MR Fix: When composing the subagent prompts in Step 3, add this instruction to each agent:

Categorize every finding with a severity level: Blocker, Critical, Warning, or Info. Format each finding as: [Severity] file:line — description. This structured output is required for the handoff to the fix pipeline.

Step 4: Compile Findings for Handoff

After all three review subagents return, compile their findings into a structured context:

## MR Fix Context

**MR:** !<mr_id> — <mr_title>
**Branch:** <source_branch> → <target_branch>
**Repository:** <repo_ref>

### Review Findings

#### Code Review Findings
<code_reviewer_output — full findings with severity levels>

#### Security Findings
<security_output — full findings with severity levels>

#### QA Findings
<qa_output — full findings with severity levels>

### Severity Summary
| Level | Count |
|-------|-------|
| Blocker | X |
| Critical | X |
| Warning | X |
| Info | X |

### MR Diff
<full diff for reference>

Only proceed to Step 5 if there are Blocker or Critical findings. If all findings are Warning/Info only:

1. Post the review comment on the MR (using the MR Review template from Step 4-5 of the Review workflow)
2. Inform the user in the conversation: "ไม่พบ Blocker/Critical — findings ทั้งหมดเป็น Warning/Info เท่านั้น ไม่จำเป็นต้องแก้ไขเร่งด่วน"
3. End the workflow here. Do NOT proceed to fix. The user can manually request fixes if desired.

Step 5: Ask User to Invoke /neo-team-kiro

Since Kiro CLI does not have programmatic skill invocation, ask the user to load the neo-team-kiro skill:

กรุณาเรียก /neo-team-kiro แล้ว paste context ด้านล่างนี้:

แก้ไขโค้ดตาม review findings จาก MR

<compiled findings from Step 4>

## Instructions
- Fix all Blocker and Critical findings
- Address Warning findings where practical
- Info findings are optional improvements
- The MR diff is provided for context — the code is already in the working directory
- After fixing, run existing tests to verify nothing is broken

/neo-team-kiro will classify this as a Bug Fix workflow internally and run:

1. system-analyzer → understand the codebase + findings
2. developer + qa + code-reviewer → implement fixes + test + verify (3-WAY PARALLEL)
3. Remediation if needed

Step 6: Post Summary Comment

After /neo-team-kiro completes (user will come back to this conversation), post a summary comment on the MR:

glab mr note <mr_id> --repo <repo_ref> -m "<summary_comment>"

The comment should follow this format:

## 🤖 MR Fix Summary

**MR:** !<mr_id> — <mr_title>

### สิ่งที่แก้ไข
<list of fixes applied, mapped to original findings>

### สถานะ
- Blocker: X/Y แก้แล้ว
- Critical: X/Y แก้แล้ว
- Warning: X/Y แก้แล้ว

**ผลลัพธ์:** ✅ แก้ไขเสร็จ / ⚠️ แก้ไขบางส่วน (ดูรายละเอียดด้านบน)

---
*Fix โดย GitLab Skill + Neo Team · Kiro CLI*

---

MR CI Fix Workflow

When the user wants to fix CI/pipeline failures for a MR, run this pipeline:

1. Fetch MR info and pipeline status
2. Identify failed jobs and fetch logs
3. Analyze failures and categorize
4. Ask user to invoke /neo-team-kiro to implement fixes
5. Push fix and optionally retry pipeline

Step 1: Fetch MR + Pipeline Status

glab mr view <mr_id> --repo <repo_ref> --output json
glab ci list --repo <repo_ref> --branch <source_branch>

Extract MR metadata and identify the latest pipeline. If the MR URL wasn't provided but the user mentions a branch or "fix pipeline", use glab ci status to find the current pipeline.

Step 2: Get Failed Job Logs

# List jobs in the failed pipeline:
glab ci view <pipeline_id> --repo <repo_ref>

# Fetch logs for each failed job:
glab ci trace <job_id> --repo <repo_ref>

Collect the last ~100 lines of each failed job's log output. These contain the actual error messages.

Step 3: Analyze Failures

Categorize each failure:

Category	Examples	Typical Fix
Build failure	Compilation errors, missing imports, type errors	Fix source code
Test failure	Unit/integration/E2E test failures	Fix code or update tests
Lint failure	Style violations, formatting issues	Run formatter, fix violations
Config failure	Docker build, missing env vars, bad CI config	Fix config files

Present a summary to the user before proceeding:

## CI Failure Analysis

**Pipeline:** #<pipeline_id> — <status>
**Branch:** <source_branch>

### Failed Jobs
1. [Build] job-name — CompilationError: missing import "pkg/util"
2. [Test] test-unit — FAIL TestUserCreate: expected 200, got 500

Proceed to fix?

Step 4: Ask User to Invoke /neo-team-kiro

Since Kiro CLI does not have programmatic skill invocation, ask the user to load the neo-team-kiro skill:

กรุณาเรียก /neo-team-kiro แล้ว paste context ด้านล่างนี้:

แก้ไข CI/pipeline failures จาก MR

## CI Failure Context
**MR:** !<mr_id> — <mr_title>
**Branch:** <source_branch>
**Pipeline:** #<pipeline_id>

### Failed Jobs
<for each failed job:>
- **Job:** <job_name> (stage: <stage>)
- **Category:** <Build|Test|Lint|Config>
- **Error:** <relevant error excerpt from logs>

## Instructions
- Fix all failing jobs
- Run the failing commands locally to verify fixes before pushing
- Do NOT change CI configuration unless the config itself is the problem
- If a test failure reveals a genuine bug, fix the code (not the test)

/neo-team-kiro will classify this as a Bug Fix workflow and route through system-analyzer → developer → verification agents.

Step 5: Push and Retry

After /neo-team-kiro completes (user returns to this conversation):

git push origin <source_branch>
glab ci retry <pipeline_id> --repo <repo_ref>

Post a summary comment on the MR:

glab mr note <mr_id> --repo <repo_ref> -m "<summary>"

Summary format:

## 🤖 CI Fix Summary

**MR:** !<mr_id> — <mr_title>
**Pipeline:** #<pipeline_id>

### สิ่งที่แก้ไข
- ✅ [Build] job-name — fixed missing import
- ✅ [Test] test-unit — fixed handler returning wrong status code

### Pipeline
🔄 Retry triggered — pipeline #<new_pipeline_id>

---
*CI Fix โดย GitLab Skill + Neo Team · Kiro CLI*

---

MR Feedback Workflow

When the user wants to address review feedback/comments on a MR, parse unresolved threads and implement fixes.

1. Fetch MR info, diff, and all comments/discussions
2. Filter and group unresolved feedback
3. Ask user to invoke /neo-team-kiro with structured feedback
4. Push fix, post summary, and resolve threads

Step 1: Fetch

glab mr view <mr_id> --repo <repo_ref> --output json
glab mr diff <mr_id> --repo <repo_ref>
glab mr note list <mr_id> --repo <repo_ref>

Step 2: Parse Unresolved Feedback

From the notes/comments, identify:

• Actionable feedback — explicit change requests ("fix this", "add error handling", "rename to X")
• Suggestions — optional improvements ("consider using...", "might be better to...")
• Questions — need user input before acting ("why did you choose X?", "should this handle Y?")

Group by file and classify:

### Unresolved Feedback

#### file: src/handler.go
1. @reviewer1: "Missing error handling on line 42" — Actionable
2. @reviewer2: "Consider using context.WithTimeout" — Suggestion

#### file: src/service.go
1. @reviewer1: "N+1 query in GetUsers" — Actionable

#### Questions (need user input)
1. @reviewer1: "Should this endpoint support pagination?"

If there are questions, present them to the user before proceeding. The user's answers become part of the context for /neo-team-kiro.

Step 3: Ask User to Invoke /neo-team-kiro

กรุณาเรียก /neo-team-kiro แล้ว paste context ด้านล่างนี้:

แก้ไขโค้ดตาม review feedback จาก MR

## Feedback Context
**MR:** !<mr_id> — <mr_title>
**Branch:** <source_branch> → <target_branch>

### Actionable Feedback
<list of actionable items with file, line, reviewer, and description>

### Suggestions
<list of suggestions — implement where practical>

### User Answers to Questions
<answers from Step 2, if any>

### MR Diff
<current diff for context>

## Instructions
- Address ALL actionable feedback items
- Implement suggestions where practical; explain in summary if skipped
- Run existing tests after changes
- Do not modify code unrelated to the feedback

Step 4: Push, Post Summary, and Resolve

After fixes are applied (user returns to this conversation):

git push origin <source_branch>
glab mr note <mr_id> --repo <repo_ref> -m "<summary>"

Summary format:

## 🤖 Feedback Addressed

**MR:** !<mr_id> — <mr_title>

### สิ่งที่แก้ไข
- ✅ src/handler.go:42 — เพิ่ม error handling ตาม @reviewer1
- ✅ src/service.go:15 — แก้ N+1 query ตาม @reviewer1
- ✅ src/handler.go:58 — ใช้ context.WithTimeout ตาม @reviewer2
- ⏭️ src/config.go:10 — skipped: ไม่เกี่ยวกับ scope ของ MR นี้

### ผลลัพธ์
- Actionable: X/Y แก้แล้ว
- Suggestions: X/Y implemented

---
*Feedback addressed โดย GitLab Skill + Neo Team · Kiro CLI*

---

Common glab Operations

Use these directly via execute_bash when the user asks for something other than a full review:

Task	Command
Create MR	glab mr create --repo <repo_ref> --remove-source-branch --squash-before-merge
List open MRs	glab mr list --repo <repo_ref>
View MR details	glab mr view <mr_id> --repo <repo_ref>
Approve MR	glab mr approve <mr_id> --repo <repo_ref>
Check pipeline status	glab ci status --repo <repo_ref>
List pipelines	glab ci list --repo <repo_ref>
Retry a job	glab ci retry <job_id> --repo <repo_ref>
Update MR description	glab mr update <mr_id> --repo <repo_ref> --description "<text>"
Add a note/comment	glab mr note <mr_id> --repo <repo_ref> -m "<text>"

MR Creation Defaults

When creating a MR with glab mr create, always include these flags:

• --remove-source-branch — delete source branch after merge
• --squash-before-merge — squash commits when MR is accepted

These are team defaults and should be applied to every MR creation, whether the user explicitly mentions them or not. The user may add other flags (e.g., --title, --description, --assignee, --reviewer) as needed.

For --repo, you can omit it if you're already inside the project directory (glab detects the remote automatically).

Error Handling

• glab not authenticated: tell the user to run glab auth login
• glab command fails: output the review as conversation text instead of posting, explain what failed
• Empty diff: note that the MR has no file changes and skip the review agents
• Large diff (>500 lines): warn the user, proceed but note the review may miss details
• Large single-line files (minified JS, large JSON): the view tool now shows partial content — note this in the review if such files are part of the diff