Paper Writer Skill

Full-pipeline academic paper writing assistant. From literature search to submission-ready manuscript.

Overview

This skill manages the entire paper writing workflow:

Literature Search → Outline → Tables/Figures → Draft → Humanize → References → Quality Review → Pre-Submission → [Revision] → [Post-Acceptance] → [Rejection → Resubmission]

Each paper is a project directory containing structured Markdown files for every section, a literature matrix, and quality checklists.

Supported Paper Types

Type	Structure	Reporting Guideline	Notes
Original Article	Full IMRAD	STROBE / CONSORT	Default
Case Report	Intro / Case / Discussion	CARE	Separate templates
Review Article	Thematic sections	-	Flexible structure
Letter / Short Communication	Condensed IMRAD	Same as original	Word limit focus
Systematic Review	PRISMA-compliant	PRISMA 2020	With PRISMA checklist
Study Protocol	SPIRIT-compliant	SPIRIT 2025	For trial registration papers

Workflow

Phase 0: Project Initialization

When the user invokes this skill, ask for:

Working title (can change later)
Paper type (Original Article / Case Report / Review / Letter / Systematic Review)
Target journal (optional but recommended)
Language (English / Japanese / Both)
Research question in one sentence
Key data available (what Tables/Figures already exist?)

Step 0.1: Capture Journal Requirements

If a target journal is specified, look up and document:

Word limits: total manuscript, abstract, each section (if specified)
Citation style: Vancouver, APA, NLM, or other
Required sections: some journals require separate Conclusion, others don't
Abstract format: structured or unstructured, word limit
Figure/Table limits: maximum number allowed
Reporting guideline: which checklist the journal requires
Special requirements: cover page format, line numbering, etc.
AI disclosure: whether the journal requires AI usage disclosure, and where (Methods, Acknowledgments, or dedicated section). See references/ai-disclosure.md.
Keywords: number required, MeSH preferred or free-text. See references/keywords-guide.md.
Graphical abstract: required or optional. See templates/graphical-abstract.md.

Use WebSearch to look up the journal's "Instructions for Authors" page.

Record all requirements in the README.md under a "Journal Requirements" section.

Step 0.2: Select Reporting Guideline

Based on paper type and study design, select the appropriate reporting guideline:

Study Type	Guideline	Reference
Randomized Controlled Trial	CONSORT 2025	`references/reporting-guidelines-full.md`
Observational study (cohort, case-control, cross-sectional)	STROBE	`references/reporting-guidelines-full.md`
Systematic review / meta-analysis	PRISMA 2020	`references/reporting-guidelines-full.md`
Case report	CARE	`references/reporting-guidelines-full.md`
Diagnostic accuracy study	STARD 2015	`references/reporting-guidelines-full.md`
Quality improvement study	SQUIRE 2.0	`references/reporting-guidelines-full.md`
Study protocol (clinical trial)	SPIRIT 2025	`references/reporting-guidelines-full.md`
Prediction model (incl. AI/ML)	TRIPOD+AI 2024	`references/reporting-guidelines-full.md`
Animal research	ARRIVE 2.0	`references/reporting-guidelines-full.md`
Health economics	CHEERS 2022	`references/reporting-guidelines-full.md`

Read ~/.claude/skills/paper-writer/references/reporting-guidelines.md (summary) or references/reporting-guidelines-full.md (comprehensive) and note the key checklist items for the selected guideline. These items will be checked throughout the writing process.

Step 0.3: Create Project Directory

For Original Article / Review / Letter / Systematic Review:

{project-dir}/
├── README.md                        # Project dashboard (status, timeline, links)
│
├── 00_literature/                   # Phase 1: Literature
│   ├── search-strategy.md           #   Search terms, databases, dates
│   ├── literature-matrix.md         #   Structured comparison table
│   └── key-papers/                  #   Notes on important papers (1 file per paper)
│
├── 01_outline.md                    # Phase 2: Paper skeleton
│
├── sections/                        # Phase 3: Manuscript sections (writing order)
│   ├── 02_methods.md
│   ├── 03_results.md
│   ├── 04_introduction.md
│   ├── 05_discussion.md
│   ├── 06_conclusion.md
│   ├── 07_abstract.md
│   └── 08_title.md
│
├── tables/                          # Tables (numbered: table1_baseline.md, ...)
├── figures/                         # Figures + captions (fig1_caption.md, ...)
├── supplements/                     # Supplementary materials
│   ├── supplementary-tables/        #   e.g., tableS1_sensitivity.md
│   ├── supplementary-figures/       #   e.g., figS1_subgroup.md
│   └── appendices/                  #   Additional methods, datasets, etc.
│
├── data/                            # Research data (see templates/data-management.md)
│   ├── raw/                         #   Original data (READ-ONLY, gitignored)
│   ├── processed/                   #   Cleaned, de-identified data
│   ├── analysis/                    #   Statistical output, scripts
│   └── data-dictionary.md           #   Variable definitions
│
├── ethics/                          # Ethics & regulatory
│   ├── irb-approval.md              #   IRB approval details, number, dates
│   ├── informed-consent.md          #   Consent process documentation
│   ├── protocol.md                  #   Study protocol (SPIRIT if applicable)
│   └── registration.md              #   Trial/study registration (UMIN, ClinicalTrials.gov)
│
├── submissions/                     # Submission history (1 subfolder per attempt)
│   └── v1_{journal}/                #   e.g., v1_bmj/
│       ├── compiled-manuscript.md   #     Full compiled manuscript snapshot
│       ├── cover-letter.md          #     Cover letter
│       ├── title-page.md            #     Title page
│       ├── declarations.md          #     Ethics, COI, funding, AI disclosure
│       ├── highlights.md            #     Key points (if required)
│       ├── graphical-abstract.md    #     Graphical abstract (if required)
│       └── submission-log.md        #     Date, portal, manuscript #, status
│
├── revisions/                       # Revision rounds (Phase 8)
│   └── r1/                          #   Round 1
│       ├── reviewer-comments.md     #     Original reviewer comments
│       ├── response-letter.md       #     Point-by-point response
│       ├── revision-cover-letter.md #     Revision cover letter
│       ├── diff-summary.md          #     Changes made (section, line, change)
│       └── compiled-manuscript.md   #     Revised manuscript snapshot
│
├── coauthor-review/                 # Co-author feedback tracking
│   ├── review-tracker.md            #   Who reviewed, when, status
│   └── feedback/                    #   Individual feedback files
│
├── correspondence/                  # Editor & reviewer communication log
│   └── YYYY-MM-DD_{subject}.md      #   e.g., 2026-03-05_decision-letter.md
│
├── references/                      # Reference management
│   └── 09_references.md             #   Formatted reference list
│
├── checklists/                      # Quality control
│   ├── section-quality.md           #   Per-section quality scores
│   ├── submission-ready.md          #   Pre-submission checklist
│   ├── reporting-guideline.md       #   CONSORT/STROBE/etc. item tracking
│   ├── gate-state.md                #   Stage-gate iteration state
│   └── feedback-*.md                #   Auto-generated gate feedback
│
└── log/                             # Decision & progress log
    ├── decisions.md                 #   Key decisions with rationale
    ├── meetings.md                  #   Meeting notes (co-authors, supervisor)
    └── timeline.md                  #   Milestone targets & actual dates

For Case Report:

{project-dir}/
├── README.md                        # Project dashboard
│
├── 00_literature/
│   ├── search-strategy.md
│   ├── literature-matrix.md
│   └── key-papers/
│
├── 01_outline.md
│
├── sections/
│   ├── 02_case.md                   # Case presentation (CARE structure)
│   ├── 03_introduction.md           # Introduction (why reportable)
│   ├── 04_discussion.md
│   ├── 05_abstract.md               # Abstract (CARE format)
│   └── 06_title.md                  # Title (must contain "case report")
│
├── tables/
├── figures/
├── supplements/
│   ├── supplementary-tables/
│   ├── supplementary-figures/
│   └── appendices/
│
├── data/
│   ├── raw/
│   ├── processed/
│   ├── analysis/
│   └── data-dictionary.md
│
├── ethics/
│   ├── irb-approval.md
│   ├── informed-consent.md          # Patient consent for publication
│   └── patient-perspective.md       # Patient's perspective (CARE item)
│
├── submissions/
│   └── v1_{journal}/
│       ├── compiled-manuscript.md
│       ├── cover-letter.md
│       ├── title-page.md
│       ├── declarations.md
│       └── submission-log.md
│
├── revisions/
│   └── r1/
│       ├── reviewer-comments.md
│       ├── response-letter.md
│       ├── diff-summary.md
│       └── compiled-manuscript.md
│
├── coauthor-review/
│   ├── review-tracker.md
│   └── feedback/
│
├── correspondence/
│   └── YYYY-MM-DD_{subject}.md
│
├── references/
│   └── 07_references.md
│
├── checklists/
│   ├── section-quality.md
│   ├── submission-ready.md
│   ├── reporting-guideline.md
│   ├── gate-state.md
│   └── feedback-*.md
│
└── log/
    ├── decisions.md
    ├── meetings.md
    └── timeline.md

Read ~/.claude/skills/paper-writer/templates/project-init.md with the Read tool and use it to generate README.md. For Case Reports, use project-init-case.md instead.

File numbering follows the recommended writing order, not the reading order. This is intentional.

Step 0.4: Organize Research Data

If the user has existing research data (clinical records, CSV files, statistical output, etc.):

Create data/raw/, data/processed/, data/analysis/ directories
Read ~/.claude/skills/paper-writer/templates/data-management.md for the full template
Ask the user to place raw data files in data/raw/ — these files are READ-ONLY from this point
Create data/raw/README.md documenting the data source, extraction date, and IRB information
Create data/data-dictionary.md listing all variables with types, ranges, and labels
Confirm de-identification status — if not yet de-identified, create a processing plan in data/processed/README.md

Security rules:

NEVER commit patient-identifiable data to git
Add data/raw/*.csv, data/raw/*.xlsx etc. to .gitignore if the repository is shared
Always confirm IRB approval number before proceeding with data analysis

Data flow: raw/ (never modify) → processed/ (clean, de-identify) → analysis/ (statistical output) → tables/ and figures/ (manuscript-ready)

Step 0.5: Data Analysis

If the user has quantitative data ready for analysis, Claude Code can execute Python scripts directly. Read ~/.claude/skills/paper-writer/templates/analysis-workflow.md for the full workflow.

Available analysis scripts:

Script	Purpose	Key Output
`scripts/table1.py`	Table 1 (baseline characteristics)	Markdown table with N, %, mean±SD, P values
`scripts/analysis-template.py`	Statistical analyses	Descriptive stats, t-test, logistic regression, survival
`scripts/forest-plot.py`	Forest plot (meta-analysis)	PNG + SVG

Workflow:

Inspect data: Load data/processed/cohort_final.csv, check shape, dtypes, missing values
Table 1: Run scripts/table1.py to generate baseline characteristics table → tables/table1.md
Primary analysis: Choose analysis type based on study design:
- Cross-sectional / case-control → logistic regression (OR with 95% CI)
- Cohort with time-to-event → survival analysis (Kaplan-Meier, log-rank)
- Continuous outcome → linear regression
- Group comparison → t-test / Mann-Whitney U
Subgroup & sensitivity analyses: By sex, age group, disease severity, etc.
Generate figures: Box plots, KM curves, forest plots, ROC curves
Link to manuscript: Map analysis output to Results section paragraphs

Analysis output directory: All results go to data/analysis/. Figures for the manuscript go to figures/.

Required Python packages: numpy, pandas, scipy, statsmodels, lifelines, matplotlib, seaborn

pip install numpy pandas scipy statsmodels lifelines matplotlib seaborn scikit-learn

Statistical reporting requirements (before writing Results):

Effect sizes with 95% confidence intervals
P values to 3 decimal places (P < 0.001 for very small)
Statistical test names specified
Software and version documented
Two-sided tests (unless justified)
Multiple comparison correction (if >1 primary outcome)
Missing data handling described

See references/statistical-reporting-full.md for detailed SAMPL guidelines and templates/analysis-workflow.md for step-by-step commands.

Phase 1: Literature Search & Organization

Step 1.1: Define Search Strategy

Create 00_literature/search-strategy.md with:

Databases: PubMed, Google Scholar (always available); Scopus, CiNii (if user has institutional access)
Search terms: MeSH terms + free-text keywords
Inclusion/exclusion criteria for papers
Date range

How to search:

Use WebSearch with targeted queries:

For PubMed: search "search terms" pediatric asthma pubmed
For Google Scholar: search "search terms" site:scholar.google.com
For general: search the research question directly

If WebSearch results are limited, use WebFetch on specific PubMed URLs:

https://pubmed.ncbi.nlm.nih.gov/?term=search+terms&sort=date

Important: WebSearch may not reliably return PubMed results with site: filtering. If results are poor, try broader searches and filter manually, or ask the user to provide key papers they already know.

Practical reality: AI-based literature search has significant limitations. The most reliable workflow is:

Ask the user to provide their 3-5 key papers (they usually know them already)
Use WebSearch to supplement with additional relevant papers
Use references/pubmed-query-builder.md to construct proper PubMed queries
Have the user validate the final literature list for completeness
Verify every AI-found citation exists (see references/citation-verification.md)

Step 1.2: Build Literature Matrix

Read ~/.claude/skills/paper-writer/templates/literature-matrix.md with the Read tool.

For each relevant paper found, extract and organize:

Author (Year)	Design	N	Population	Key Finding	Limitation	Relevance

Aim for 15-30 papers for an original article, 8-15 for a case report, 30-50 for a systematic review.

Step 1.3: Identify Key Papers

For the 3-5 most important papers, create individual notes in 00_literature/key-papers/ with:

Full citation
Study design and quality assessment
Key results with exact numbers
How it relates to the current paper
What gap it leaves (that our paper addresses)

Phase 2: Outline

Create 01_outline.md with the paper skeleton.

Read ~/.claude/skills/paper-writer/references/imrad-guide.md with the Read tool for the detailed IMRAD structure. For Case Reports, this guide does not apply directly — use the CARE structure instead.

The outline should specify:

Each section's key points (bullet list)
Which papers support which points
Which Tables/Figures go where
The story arc: Background Problem → Gap → Our Approach → Findings → Implications
For Case Reports: Background → Why Reportable → Case Details → Clinical Lesson

Get user approval on outline before proceeding to drafting.

Phase 2.5: Tables & Figures

Read ~/.claude/skills/paper-writer/references/tables-figures-guide.md with the Read tool.

Tables and figures are the backbone of a paper — many reviewers look at the abstract, then the tables/figures, before reading the text. Design them before writing prose so the text can reference them naturally.

Step 2.5.1: Plan Tables & Figures

Based on the outline, determine:

Which data belongs in a table vs. a figure vs. the text
Table 1 is almost always "Baseline Characteristics" (use the template in references/tables-figures-guide.md)
How many tables/figures are allowed by the journal (check Phase 0 requirements)

Step 2.5.2: Create Tables

Create table files in tables/ directory:

table1_baseline.md — Baseline characteristics (standard format)
table2_*.md — Additional tables as needed (regression results, outcomes, etc.)

Rules:

Title above the table
No vertical lines (horizontal lines only)
Consistent decimal places within each column
Footnotes for abbreviations and statistical tests
Total sample size in the header row

Step 2.5.3: Plan Figures

Create caption files in figures/ directory:

fig1_caption.md — Often a flow diagram (CONSORT/PRISMA) or study design
fig2_caption.md — Key result visualization

Rules:

Captions must be self-explanatory without reading the main text
Include key statistics in captions
Specify resolution requirements (300+ DPI for print, 600+ for line art)
Use colorblind-friendly palettes

Step 2.5.4: Graphical Abstract (if required)

If the journal requires or encourages a graphical abstract, read ~/.claude/skills/paper-writer/templates/graphical-abstract.md and plan the visual summary.

Get user review on table/figure plan before proceeding to drafting.

Phase 3: Drafting

The writing order is intentional and produces better papers. Follow it strictly.

3-A: Original Article Workflow

Step 3.1: Methods & Results (Write as a pair)

Read ~/.claude/skills/paper-writer/templates/methods.md and ~/.claude/skills/paper-writer/templates/results.md with the Read tool.

Methods rules:

Reproducibility is everything
Include: study design, patients/subjects, data collection, statistical analysis, ethics
Every method must have a corresponding result

Results rules:

Facts only, no interpretation
No references to other studies
Every Table/Figure must be mentioned in text
Methods ↔ Results must correspond 1:1

Write sections/02_methods.md and sections/03_results.md together, ensuring perfect correspondence. Cross-check: every subsection in Methods must map to a corresponding subsection in Results, and vice versa.

Workflow: Write Methods subsection 1 → Results subsection 1 → Methods subsection 2 → Results subsection 2 → ... This interleaving ensures 1:1 correspondence.

Step 3.2: Introduction (Paragraph 3) & Conclusion (Write as a pair)

Read ~/.claude/skills/paper-writer/templates/introduction.md and ~/.claude/skills/paper-writer/templates/conclusion.md with the Read tool.

Why write Paragraph 3 first? The study objective (Introduction P3) and the conclusion must mirror each other. Writing them together guarantees alignment. Paragraphs 1-2 provide background that funnels toward the objective — they are easier to write once the objective is locked.

Introduction structure (3 paragraphs):

General background (everyone agrees with this)
Clinical question / knowledge gap (but we don't know X)
Study objective (therefore, we investigated...)

Conclusion rules:

Must directly answer the objective stated in Introduction paragraph 3
One core message
Brief and direct

Write the final paragraph of sections/04_introduction.md and sections/06_conclusion.md together to ensure they mirror each other.

Step 3.3: Discussion

Read ~/.claude/skills/paper-writer/templates/discussion.md with the Read tool.

Discussion structure:

Summary of main findings 2-N. Comparison with prior literature (use 00_literature/literature-matrix.md) N+1. Limitations — read ~/.claude/skills/paper-writer/templates/limitations-guide.md for categories, templates, and bilingual examples N+2. Clinical implications / future directions

Discussion rules:

No new results
No excessive speculation
Support every claim with a reference
Keep it focused
Limitations subsection is mandatory — be specific about direction of bias and mitigation

Step 3.4: Introduction (Paragraphs 1-2)

Now write paragraphs 1-2 of sections/04_introduction.md. The background should funnel toward the research question already written in paragraph 3.

Step 3.5: Abstract

Read ~/.claude/skills/paper-writer/templates/abstract.md with the Read tool.

Write sections/07_abstract.md as a structured abstract:

Background/Objective (1-2 sentences)
Methods (2-3 sentences)
Results (3-4 sentences)
Conclusions (1-2 sentences)

Check the journal-specific word limit captured in Phase 0. The Abstract must be consistent with the full text. Cross-check all numbers.

Step 3.6: Title

Write sections/08_title.md with 3-5 title candidates. Evaluate each against:

Specific (what was studied?)
Concise (< 15 words ideal)
Contains keywords (searchable)
No conclusion spoilers

Get user approval on final title.

3-B: Case Report Workflow

Step 3.1-CR: Case Presentation

Read ~/.claude/skills/paper-writer/templates/case-report.md with the Read tool.

Write 02_case.md following the CARE structure:

Patient information (demographics, history)
Clinical findings
Timeline (consider a timeline figure)
Diagnostic assessment
Therapeutic intervention
Follow-up and outcomes
Patient perspective (CARE item 10) — when possible, include the patient's own experience in their words

Rules:

Chronological order
Only clinically relevant details
Document informed consent for publication
Report both positive AND negative findings
Patient perspective strengthens the report and is recommended by CARE guidelines

Step 3.2-CR: Discussion

Read ~/.claude/skills/paper-writer/templates/discussion.md with the Read tool.

Write 04_discussion.md:

Why this case is significant (clinical lesson)
Comparison with published literature
Limitations of the case
Clinical implications

Keep it focused and shorter than in an Original Article.

Step 3.3-CR: Introduction

Read ~/.claude/skills/paper-writer/templates/case-introduction.md with the Read tool.

Write 03_introduction.md:

Brief background on the condition
Why this case is reportable (rarity, novelty, instructive value)
Optional: "We report a case of... to highlight..."

Write the Introduction AFTER the Case section — you need to know the full case to justify its reporting.

Step 3.4-CR: Abstract

Read ~/.claude/skills/paper-writer/templates/case-abstract.md with the Read tool.

Write 05_abstract.md using the CARE abstract structure:

Background (1-2 sentences: why this case is worth reporting)
Case Presentation (3-5 sentences: demographics, findings, diagnosis, treatment, outcome)
Conclusions (1-2 sentences: clinical lesson)

Do NOT use Methods/Results structure for Case Report abstracts.

Step 3.5-CR: Title

Write 06_title.md with 3-5 title candidates. For case reports:

Title MUST contain "case report" (CARE requirement)
Include the diagnosis or key finding
Example: "Successful treatment of severe pediatric asthma with dupilumab: a case report"

Get user approval on final title.

3-C: Review Article Workflow

Review articles synthesize existing literature on a topic. The structure is thematic rather than IMRAD.

Step 3.1-RA: Thematic Sections

Read ~/.claude/skills/paper-writer/templates/discussion.md for general writing guidance.

Organize the body into thematic sections based on the outline. Common structures:

Chronological: Evolution of understanding over time
Thematic: Grouped by subtopic (most common)
Methodological: Grouped by study approach

Each section should:

Synthesize findings across studies (not just summarize one at a time)
Identify areas of consensus and controversy
Highlight gaps in the literature
Use the literature matrix to ensure comprehensive coverage

Step 3.2-RA: Introduction

Write the introduction:

Scope and importance of the topic
Why a review is needed now (new evidence, controversy, emerging field)
Objectives and scope of this review

Step 3.3-RA: Conclusion & Future Directions

Write the conclusion:

Synthesize the key themes identified
Current state of knowledge
Gaps and future research directions
Clinical implications (if applicable)

Step 3.4-RA: Abstract

Write an unstructured abstract (unless journal requires structured format):

Purpose of the review
Methods (databases searched, date range, selection criteria)
Key findings synthesized across themes
Conclusions

Step 3.5-RA: Title

Write title candidates. For review articles:

Include "review", "narrative review", or "scoping review" in the title
Clearly state the topic
Example: "Artificial intelligence in diagnostic radiology: a narrative review"

Get user approval on final title.

3-D: Systematic Review Workflow

Read ~/.claude/skills/paper-writer/templates/sr-outline.md with the Read tool for the complete PRISMA 2020-compliant template.

Systematic reviews follow a strict, pre-registered protocol. The template provides the full structure with PRISMA 2020 checklist item numbers.

Step 3.1-SR: Methods

The Methods section is the most critical part. Write it following PRISMA items P-5 through P-18:

Protocol and registration (PROSPERO ID)
Eligibility criteria (PICO/PECO)
Information sources (databases, dates)
Search strategy (full strategy in supplementary)
Selection process (screening, inter-rater reliability)
Data collection process
Data items
Risk of bias assessment (tool selection)
Effect measures
Synthesis methods (narrative and/or meta-analysis)
Subgroup and sensitivity analyses
Reporting bias assessment
Certainty of evidence (GRADE)

Step 3.2-SR: Results

Write Results following PRISMA items P-19 through P-23:

PRISMA flow diagram (Figure 1 — mandatory)
Study characteristics table
Risk of bias summary
Results of individual studies
Results of syntheses (forest plots if meta-analysis)
Reporting biases (funnel plots if ≥10 studies)
Certainty of evidence (GRADE Summary of Findings table)

Step 3.3-SR: Discussion

Write Discussion following PRISMA items P-25 through P-27:

Summary of evidence with certainty levels
Comparison with previous reviews
Strengths and limitations (both evidence and review process)
Implications for practice and research

Step 3.4-SR: Introduction, Abstract, Title

Follow the same principles as Original Article but with SR-specific framing:

Introduction: justify why this SR is needed (no existing SR, outdated SR, new evidence)
Abstract: must include number of studies, total participants, key pooled estimates
Title: must include "systematic review" (and "meta-analysis" if applicable)

Get user approval on final title.

3-E: Letter / Short Communication Workflow

Letters and short communications follow a condensed IMRAD format. The key constraint is the word limit (typically 600-1500 words).

Step 3.1-LT: Condensed Draft

Write a single file covering all sections:

Introduction (1-2 sentences): State the purpose directly. No lengthy background.
Methods (1 paragraph): Essential details only. Reference a fuller description elsewhere if needed.
Results (1-2 paragraphs): Key findings only. Usually 1 table OR 1 figure (not both).
Discussion (1-2 paragraphs): Main interpretation, 1-2 comparisons with literature, key limitation.

Rules:

Every word counts — eliminate all filler
Typically limited to 1 table + 1 figure, or 2 of one type
References usually limited to 10-15
No separate Conclusion section (fold into last Discussion paragraph)

Step 3.2-LT: Abstract

Write a brief abstract (often 100-150 words, unstructured).

Step 3.3-LT: Title

Short, direct titles work best. No need for elaborate structure.

Get user approval on final title.

Phase 4: Humanize

Read ~/.claude/skills/paper-writer/references/humanizer-academic.md with the Read tool.

After drafting, run a humanization pass on every section to remove AI-generated writing patterns.

Step 4.1: Scan for AI Patterns

Read each section file and identify:

English papers — check for these 18 patterns:

Significance inflation ("pivotal", "evolving landscape", "underscores")
Notability claims ("landmark", "renowned", "groundbreaking")
Superficial -ing analyses ("highlighting", "underscoring", "showcasing")
Promotional language ("profound impact", "remarkable", "dramatic")
Vague attributions ("Studies have shown", "Experts argue")
Formulaic challenges ("Despite challenges... future outlook")
AI vocabulary ("Additionally", "crucial", "delve", "landscape", "pivotal")
Copula avoidance ("serves as" instead of "is")
Negative parallelisms ("Not only... but also")
Rule of three overuse (forcing ideas into groups of three)
Synonym cycling ("Patients... Participants... Subjects")
False ranges ("from X to Y" on unrelated scales)
Em dash overuse
Title Case in headings
Curly quotation marks
Filler phrases ("In order to", "It is important to note", "comprehensive investigation")
Excessive hedging ("may suggest... have the potential to")
Generic positive conclusions ("The future looks bright")

Japanese papers (日本語) — 13パターン（A〜C）+ AIボキャブラリー一覧（D）をチェック:

A. 記号と表記（3パターン）:

emダッシュ、カギ括弧多用、丸括弧補足しすぎ

B. 文のリズム（3パターン）:

同じ語尾の連続（である。である。である。）
接続詞過多（さらに、また、加えて）
段落の終わりが毎回きれいに閉じる

C. 学術文特有の問題（7パターン）:

C-1 保険が多い（逃げ道の常設）
C-2 根拠なき評価語（非常に有効、大きなメリット）
C-3 抽象語だけで押し切る
C-4 AIボキャブラリー（包括的、革新的、シームレス、示唆に富む）
C-5 同義語の言い換え連打
C-6 受動態の過剰使用（検討が行われた → 検討した）
C-7 非学術的な文体の混入（「参考になれば幸いである」「ポイントは以下の通り」→ 削除）

D. AIボキャブラリー一覧: references/humanizer-academic.md の日本語セクションDを参照。C-4のパターン判定に使う語彙リスト。

Step 4.2: Rewrite

Consult references/humanizer-academic.md for specific before/after examples. For each identified pattern:

Replace with precise, specific academic language
Preserve all data, statistics, and citations exactly
Use simple constructions ("is" over "serves as")
Remove filler and reduce hedging to match evidence strength
Ensure consistent terminology throughout
If 3+ AI patterns appear in one sentence, rewrite the entire sentence rather than fixing patterns individually

Step 4.3: Section-Specific Focus

English:

Section	Priority Patterns
Introduction	#1 Significance inflation, #5 Vague attributions, #7 AI vocabulary, #3 -ing analyses
Methods	#16 Filler phrases, #8 Copula avoidance
Results	#3 -ing analyses, #4 Promotional language
Discussion	#17 Excessive hedging, #6 Formulaic challenges
Conclusion	#18 Generic conclusions, #1 Significance inflation
Abstract	ALL patterns (most visible section)

日本語:

セクション	重点パターン
緒言	C-2 根拠なき評価語, B-2 接続詞過多
方法	C-6 受動態の過剰使用, C-3 抽象語
結果	B-1 同じ語尾, A-3 丸括弧多用
考察	C-1 保険が多い, C-4 AIボキャブラリー
結論	C-2 根拠なき評価語, C-7 非学術的文体
抄録	全パターン

Step 4.4: Verify

After humanization:

English:

日本語:

「さらに」「また」「加えて」の連発がない（各セクション最大1回）
同じ語尾が3回以上続いていない
根拠なき「非常に」「大きな」がない
受動態の過剰使用がない（能動態に直す）
定型的な締めの句がない（「参考になれば幸いである」等）
抽象語だけで押し切っていない
カギ括弧を多用していない

Phase 5: References

Read ~/.claude/skills/paper-writer/references/citation-guide.md with the Read tool.

Build references/09_references.md (or references/07_references.md for Case Reports):

Collect all cited papers from all sections
Format according to target journal style captured in Phase 0 (Vancouver, APA, etc.)
Number sequentially as cited
Verify completeness: every reference is cited in text, every citation has a reference entry
Verify authenticity: For EVERY AI-suggested reference, confirm the paper exists via WebSearch with the exact title. AI frequently fabricates plausible-sounding citations.

Phase 6: Quality Review

Read ~/.claude/skills/paper-writer/references/section-checklist.md with the Read tool. For Case Reports, also check the CARE-specific items in templates/case-report.md.

Run the quality checklist against each section. Update checklists/section-quality.md with results.

Verification checklist:

Phase 7: Pre-Submission

Read ~/.claude/skills/paper-writer/templates/cover-letter.md and ~/.claude/skills/paper-writer/templates/submission-ready.md with the Read tool.

Create:

Title page — read ~/.claude/skills/paper-writer/templates/title-page.md for the template (running head, all authors with ORCID, affiliations, word counts, corresponding author, clinical trial registration)
Highlights / Key Points — read ~/.claude/skills/paper-writer/templates/highlights.md and create the appropriate summary box for the target journal (JAMA Key Points, BMJ "What is known", Elsevier Highlights, Lay Summary, etc.)
Acknowledgments — read ~/.claude/skills/paper-writer/templates/acknowledgments.md and draft (non-author contributions, AI tool disclosure, patient acknowledgment)
Declarations — read ~/.claude/skills/paper-writer/templates/declarations.md and complete (Ethics, COI using references/coi-detailed.md, Funding, Data Availability, AI Disclosure, CRediT)
Cover letter using the template
checklists/submission-ready.md using the template — fill in journal-specific limits from Phase 0
Compile all sections into a single reading-order Markdown file → submissions/v1_{journal}/compiled-manuscript.md
Create submissions/v1_{journal}/submission-log.md with submission date, portal, manuscript ID
Log the submission in log/timeline.md

Final compilation order (reading order):

For Original Article:

Title → Abstract → Introduction → Methods → Results → Discussion → Conclusion → References

For Case Report:

Title → Abstract → Introduction → Case Presentation → Discussion → References

The compiled file should include all section content in sequence. Tables and Figures should be referenced but kept in their separate folders. All submission documents go into submissions/v1_{journal}/.

Phase 8: Revision (Post-Review)

When the user receives reviewer comments (peer review, editorial decision letter):

Step 8.1: Organize Reviewer Comments

Create revisions/r1/reviewer-comments.md:

Parse the decision letter and reviewer comments
Number each comment sequentially (R1-1, R1-2, R2-1, R2-2, etc.)
Categorize each comment:
- Must fix: Factual errors, missing data, methodological concerns
- Should fix: Reasonable suggestions that improve the paper
- Consider: Optional suggestions, stylistic preferences
- Rebut: Comments based on misunderstanding (requires polite explanation)

Step 8.2: Create Response Letter

Create revisions/r1/response-letter.md:

For each comment, use this format:

**Comment R1-1:** [Quote the reviewer's comment]

**Response:** [Your response]

**Changes made:** [Specific changes with page/line numbers, or explanation if no change]

Rules for response letters:

Thank the reviewer for constructive feedback (once at the beginning, not per comment)
Be specific about what was changed and where
For rebuttals, acknowledge the reviewer's perspective, then explain with evidence
Never be defensive or dismissive
If a change was not made, explain why with references or data

Step 8.3: Implement Revisions

Track which sections need modification based on reviewer comments
Make changes in the relevant section files
Mark changed text (many journals require highlighted changes or a diff)
Roll back affected phases: re-run Humanize (Phase 4) and Quality Review (Phase 6) on modified sections
Update word counts and verify journal limits are still met

Step 8.4: Verify Revision Completeness

Every reviewer comment has a response
Every "Must fix" and "Should fix" item has been addressed
Rebuttals are supported by evidence
Changed text is marked/highlighted
References updated if new citations added
Abstract updated if results or conclusions changed
Cover letter for resubmission drafted

Phase 9: Post-Acceptance

Read ~/.claude/skills/paper-writer/templates/proof-correction.md with the Read tool.

After acceptance, the corresponding author receives galley proofs. This is the LAST opportunity to correct errors.

Step 9.1: Proof Review

When proofs arrive (typically 2-8 weeks after acceptance, turnaround: 24-72 hours):

Critical checks:

Author names, affiliations, and ORCID — correct?
Abstract numbers match main text?
All tables — data values correct, no transposition errors?
All figures — correct images, acceptable quality?
Reference list — complete, correct numbering?
Corresponding author email — correct?
Funding and COI statements — accurate?
Clinical trial registration number — present?

NOT allowed at proof stage:

Rewriting sentences or paragraphs
Adding new data, references, or authors
Changing conclusions

Step 9.2: Submit Corrections

Use the journal's proofing system (Proof Central, CATS, eProofing, or direct PDF return). For each correction: state page, column, line, and exact change.

Step 9.3: Post-Publication

After publication:

Verify the final published version matches the accepted manuscript
Share via institutional repository (Green OA) if applicable — see references/open-access-guide.md
Update clinical trial registry with results (if applicable) — see references/clinical-trial-registration.md
Share with co-authors and collaborators

Phase 10: Rejection & Resubmission

Read ~/.claude/skills/paper-writer/references/desk-rejection-prevention.md and references/journal-reformatting.md with the Read tool.

Step 10.1: Assess the Rejection

Decision	Action
Desk rejection (scope)	Reformat and submit to next journal immediately
Desk rejection (quality)	Revise manuscript, then reformat and submit
Peer review rejection	Read reviews carefully; major revision before next journal
Reject with encouragement to resubmit	Treat as major revision; address all comments

Step 10.2: Quick Reformat

Use references/journal-reformatting.md checklist:

Change reference format (use reference manager)
Restructure abstract with new headings — see references/abstract-formats.md
Adjust word count — see references/word-count-limits.md
Add/remove special sections (Key Points, Highlights)
Reformat title page
Write new cover letter (address new editor by name)
Verify no mention of previous journal name in manuscript

Step 10.3: Cascading Submission Strategy

Track submissions:

Journal	Submitted	Decision	Turnaround	Next Action
[Journal 1]	YYYY-MM-DD	—	—	—

Plan cascade: Reach journal → Target journal → Safety journal → Backup journal.

Section-Specific AI Guidelines

What AI Should Do

Section	AI Role
Literature search	Search, organize, summarize — user validates relevance
Methods	Draft based on user's data description — user verifies accuracy
Results	Structure and format — user provides the actual data
Case (Case Report)	Structure chronologically — user provides clinical details
Introduction	Draft background from literature — user refines narrative
Discussion	Suggest comparisons with literature — user controls interpretation
Abstract	Generate from full text — user ensures accuracy
References	Format and organize — user verifies completeness and authenticity

What AI Should NOT Do

Fabricate data or statistics
Invent citations (always verify with WebSearch)
Write Results without user-provided data
Write Case Presentation without user-provided clinical details
Make clinical recommendations beyond the data
Skip the user approval step at outline and title phases

Status Tracking

Update README.md status after each phase. Use these status values:

Not Started: Phase not begun
In Progress: Phase actively being worked on (add details in Notes)
Draft Complete: First draft finished, pending review
Done: Phase completed and reviewed

Use the appropriate status tracker based on paper type:

Original Article:

Phase	Status	Last Updated
Literature Search	Not Started	-
Outline	Not Started	-
Tables & Figures	Not Started	-
Methods & Results	Not Started	-
Introduction & Conclusion	Not Started	-
Discussion	Not Started	-
Abstract	Not Started	-
Title & Keywords	Not Started	-
Humanize	Not Started	-
References	Not Started	-
Declarations	Not Started	-
Quality Review	Not Started	-
Pre-Submission	Not Started	-

Case Report:

Phase	Status	Last Updated
Literature Search	Not Started	-
Outline	Not Started	-
Tables & Figures	Not Started	-
Case Presentation	Not Started	-
Discussion	Not Started	-
Introduction	Not Started	-
Abstract	Not Started	-
Title & Keywords	Not Started	-
Humanize	Not Started	-
References	Not Started	-
Declarations	Not Started	-
Quality Review	Not Started	-
Pre-Submission	Not Started	-

Review Article:

Phase	Status	Last Updated
Literature Search	Not Started	-
Outline	Not Started	-
Tables & Figures	Not Started	-
Thematic Sections	Not Started	-
Introduction	Not Started	-
Conclusion & Future Directions	Not Started	-
Abstract	Not Started	-
Title & Keywords	Not Started	-
Humanize	Not Started	-
References	Not Started	-
Declarations	Not Started	-
Quality Review	Not Started	-
Pre-Submission	Not Started	-

Systematic Review:

Phase	Status	Last Updated
Literature Search	Not Started	-
Outline	Not Started	-
Tables & Figures	Not Started	-
Methods (PRISMA)	Not Started	-
Results (PRISMA)	Not Started	-
Discussion	Not Started	-
Introduction	Not Started	-
Abstract	Not Started	-
Title & Keywords	Not Started	-
Humanize	Not Started	-
References	Not Started	-
Declarations	Not Started	-
Quality Review	Not Started	-
Pre-Submission	Not Started	-

Letter / Short Communication:

Phase	Status	Last Updated
Literature Search	Not Started	-
Outline	Not Started	-
Tables & Figures	Not Started	-
Condensed Draft	Not Started	-
Abstract	Not Started	-
Title & Keywords	Not Started	-
Humanize	Not Started	-
References	Not Started	-
Quality Review	Not Started	-
Pre-Submission	Not Started	-

Resuming a Project

When the user invokes this skill on an existing project directory:

Read README.md to understand current status, paper type, target journal, and research question
Scan section files to assess actual content state:
- Read each section file that shows "In Progress" or "Draft Complete"
- Check word count and completeness (empty sections, TODO markers, partial drafts)
- Compare actual file state with the status tracker — the files are the source of truth
Present a summary to the user: "Here is where we left off: [status]. The next step is [phase]. Shall I continue?"
Check for workflow updates: Compare the README status table against the canonical phase list above. If phases are missing (e.g., old project created before "Humanize" was added), add them with "Not Started" status and inform the user
Resume from the next incomplete phase
Update status tracker

Handling Mid-Project Changes

Changing target journal: If the user wants to change the target journal:

Update README.md Paper Info and Journal Requirements
Re-check: citation style, word limits, abstract format, reporting guideline
Reformat references if citation style changed
Check word counts against new limits
Update cover letter

Adding data or revisions: If the user has new data or reviewer feedback:

Identify which sections are affected
Roll back affected phases to "In Progress"
Re-run from that phase forward (including Humanize and Quality Review)

Language Support

English Papers

Use standard academic English
Follow target journal's style guide
Flag awkward phrasing for user review

Japanese Papers

IMRAD形式は英語論文と同じ（Case Reportは例外: CARE形式）
「です・ます」ではなく「である」調
専門用語は原則として日本語（初出時に英語併記）
症例報告では「症例提示」「臨床経過」等の標準的な見出しを使用
論文の書き方ガイドが別途ある場合は参照のこと

Team Mode（チームモード）

ユーザーが「チームで」「team mode」「並列で」と指示した場合、各フェーズを並列エージェントで実行し、大幅に高速化する。

チーム構成

エージェント	役割	エージェント定義	モデル
文献検索	DB別の並列論文検索	`~/.claude/agents/paper-lit-searcher.md`	sonnet
表・図設計	表と図の並列設計	`~/.claude/agents/paper-table-figure-planner.md`	sonnet
セクション執筆	汎用セクション執筆	`~/.claude/agents/paper-section-drafter.md`	sonnet
ヒューマナイザー	AI文体パターン除去	`~/.claude/agents/paper-humanizer.md`	haiku
参考文献	引用収集・検証	`~/.claude/agents/paper-ref-builder.md`	sonnet
セクションレビュー	セクション品質チェック	`~/.claude/agents/paper-section-reviewer.md`	sonnet
品質ゲート	横断整合性の最終検証	`~/.claude/agents/paper-quality-gate.md`	opus

Phase別チームワークフロー

Phase 0, 2: 逐次実行（変更なし）

ユーザーとの対話が必要なため、既存フローのまま実行する。

Phase 1: 文献検索（並列 x3）

paper-lit-searcher を3つ並列でAgent toolから起動する：

Agent A: PubMed検索（MeSH用語使用）
Agent B: Google Scholar検索（フリーテキスト）
Agent C: ユーザー提供の重要論文レビュー + ドメイン固有DB（CiNii, EMBASE等）

3エージェント完了後、リードが結果をマージし 00_literature/literature-matrix.md を作成（重複除去）。

Phase 2.5: 表・図（並列 x2）

paper-table-figure-planner を2つ並列で起動：

Agent A: 表の設計（tables/ に出力）
Agent B: 図の設計（figures/ に出力）

Phase 3: ドラフティング（グループ並列）

paper-section-drafter を依存関係に基づいてラウンド実行する。

Original Article の場合:

Round 1: Methods + Results（ペアリング執筆、1エージェント）
Round 2: Introduction P3 + Conclusion（並列 x2、ミラー関係）
Round 3: Discussion + Introduction P1-P2 + Abstract（並列 x3）
Round 4: Title（1エージェント）

Case Report の場合:

Round 1: Case Presentation（逐次、ユーザーの臨床情報必要）
Round 2: Discussion + Introduction（並列 x2）
Round 3: Abstract + Title（並列 x2）

Systematic Review の場合:

Round 1: Methods（逐次、最重要セクション）
Round 2: Results（逐次、Methods構造に依存）
Round 3: Discussion + Introduction + Abstract（並列 x3）
Round 4: Title（1エージェント）

Phase 4: ヒューマナイズ（並列 x最大6）

paper-humanizer をセクション数分並列で起動：

各エージェントが1セクションを担当
全エージェントが references/humanizer-academic.md を参照
完了後、リードがPhase 4.4検証チェックリストを実行

Phase 5: 参考文献（2段階）

paper-ref-builder を2段階で実行：

Builder モード: 全セクションから引用収集→ジャーナル形式でフォーマット
Verifier モード: WebSearchで各文献の実在確認→捏造フラグ

Phase 6: 品質レビュー（並列 + ゲート）

Round 1: paper-section-reviewer をセクション数分並列で起動

各エージェントが references/section-checklist.md に基づき評価

Round 2: paper-quality-gate を1つ起動（opusモデル）

全セクションの横断整合性を検証
PASS必須。FAILなら該当セクションを修正し再レビュー

Phase 7: 投稿準備（並列 x4）

paper-section-drafter を4つ並列で起動：

Agent A: タイトルページ（templates/title-page.md 参照）
Agent B: ハイライト / Key Points（templates/highlights.md 参照）
Agent C: 謝辞・宣言（templates/acknowledgments.md + templates/declarations.md 参照）
Agent D: カバーレター（templates/cover-letter.md 参照）

完了後、scripts/compile-manuscript.sh で最終統合。

Phase 8: リビジョン（並列 x3）

レビュアーコメントのパース・カテゴリ分けは逐次（ユーザー対話）。その後：

Agent A (paper-section-drafter): Must Fix コメント対応
Agent B (paper-section-drafter): Should Fix コメント対応
Agent C (paper-section-drafter): 反論（Rebut）ドラフト作成

完了後、修正セクションに Phase 4（ヒューマナイズ）と Phase 6（品質レビュー）を再実行。

Phase 9-10: 逐次実行（変更なし）

イベント駆動（プルーフ到着、リジェクション通知）のため既存フローのまま。

チームモードの使い分け

場面	推奨モード
Original Article（多セクション）	チームモード
Systematic Review（大量文献）	チームモード
Case Report（少セクション）	逐次モード
Letter / Short Communication	逐次モード
締め切りが迫っている場合	チームモード

Autonomous Stage-Gate System（自律品質ゲート）

チームモード時、各Phaseに品質ゲートを設ける。ゲートがFAILの場合、修正エージェントを自動再起動してPASSまでループする。最大3イテレーションでユーザーにエスカレーション。

ゲートフロー

Phase N 完了 → [ゲートエージェント] → PASS? → 次のPhaseへ
                                    → FAIL + iter<3 → FEEDBACK.md生成 → [修正エージェント(revision_mode)] → ゲートに戻る
                                    → FAIL + iter≥3 → ユーザーにエスカレーション（checklists/escalation-log.md）

Phase別ゲート定義

Phase	ゲート名	PASS条件	ゲート担当	修正担当
1	文献品質	≥10論文、全DOI/URLあり、捏造なし	paper-section-reviewer	paper-lit-searcher
2	アウトライン	全IMRAD存在、≥2引用マッピング	paper-section-reviewer	ユーザーに即エスカレ
2.5	表・図	全設計ファイル完備、ジャーナル制限内	paper-section-reviewer	paper-table-figure-planner
3	セクション	score≥80%、Must Fix=0	paper-section-reviewer	paper-section-drafter
4	ヒューマナイズ	高優先AIパターン残存0	paper-section-reviewer	paper-humanizer
5	参考文献	捏造0、孤立引用0	paper-ref-builder(verifier)	paper-ref-builder(builder)
6	横断整合	PASS or CONDITIONAL_PASS	paper-quality-gate(opus)	paper-section-drafter
7	投稿準備	全必須書類あり、語数制限内	paper-section-reviewer	paper-section-drafter

フィードバックファイル形式

ゲートFAIL時、オーケストレーターが checklists/feedback-{phase}-{section}.md を生成する：

---
revision_mode: true
iteration: {N} of 3
section: {section_name}
source_file: {path/to/section_file.md}
gate_verdict: FAIL
---

## Must Fix
### Issue 1
- item: {チェックリスト項目名}
- location: {段落番号 or 行範囲}
- problem: {問題の1文記述}
- fix: {具体的な修正指示}

## Should Fix
### Issue 2
- item: {項目名}
- fix: {修正指示}

## Context (変更不可)
- reporting_guideline: {PRISMA等}
- journal: {ジャーナル名}
- language: {English/Japanese}

修正エージェントの起動方法

ゲートFAIL時、修正エージェントに以下を渡す：

revision_mode: true
feedback_file: {project_dir}/checklists/feedback-{phase}-{section}.md
source_file: {project_dir}/{section_file.md}

全修正エージェント（paper-section-drafter, paper-humanizer, paper-lit-searcher, paper-table-figure-planner）は revision_mode: true を受け取ると、フィードバックの Must Fix 項目のみを処理し、通常の初期ワークフローをスキップする。

ゲート状態の永続化

checklists/gate-state.md でイテレーション回数を管理：

| Phase | Section | Iteration | Status | Last Run |
|-------|---------|-----------|--------|----------|
| phase3 | methods | 2 | IN_PROGRESS | 2026-03-05 |
| phase4 | intro | 0 | PASS | 2026-03-05 |

エスカレーションプロトコル

3イテレーション到達時：

checklists/escalation-log.md に未解決の Must Fix 一覧と説明を記録
ユーザーにメッセージ表示（該当ファイルパスと問題点を明示）
ワークフローを一時停止
ユーザーが手動修正後「continue」で再開 → イテレーションカウンターを0にリセット

YAML verdict によるループ判定

section-reviewer と quality-gate は出力ファイル冒頭にYAMLヘッダを付与する：

# section-reviewer
---
gate_verdict: PASS | FAIL
must_fix_count: {N}
score_percent: {N}
section: {name}
---

# quality-gate
---
gate_verdict: PASS | CONDITIONAL_PASS | FAIL
must_fix_count: {N}
affected_sections: [methods, results]
---

オーケストレーターはYAMLヘッダのみ読み取ってループ継続/終了を判定する。CONDITIONAL_PASS（Should Fixのみ残存）はPASS扱い。

並列ゲート実行

一部のゲートは並列実行可能：

Phase 3: Methods+Results ペア ‖ Introduction+Conclusion ペア（Discussion は独立）
Phase 4: 全セクションのヒューマナイズゲートを同時実行
Phase 6: 全セクションレビューの後に quality-gate（順序依存）

Abstract のゲートは全セクション PASS 後に実行（他セクションの数値に依存するため）。

Reference Files

references/imrad-guide.md - IMRAD structure and writing principles
references/section-checklist.md - per-section quality checklist (Original Article + Case Report)
references/citation-guide.md - citation formatting and management
references/reporting-guidelines.md - CONSORT, STROBE, PRISMA, CARE summaries
references/humanizer-academic.md - AI writing pattern detection (EN 18 + JP 13 patterns)
templates/project-init.md - project README template (Original Article)
templates/project-init-case.md - project README template (Case Report)
templates/literature-matrix.md - literature comparison matrix
templates/methods.md - Methods section writing guide (Original Article)
templates/results.md - Results section writing guide (Original Article)
templates/case-report.md - Case presentation writing guide (Case Report, CARE-compliant)
templates/case-introduction.md - Case Report introduction guide
templates/case-abstract.md - Case Report abstract guide (CARE format)
templates/introduction.md - Introduction section writing guide (Original Article)
templates/discussion.md - Discussion section writing guide
templates/conclusion.md - Conclusion writing guide
templates/abstract.md - Abstract writing guide (Original Article)
templates/cover-letter.md - Cover letter template
templates/submission-ready.md - Pre-submission checklist template
templates/sr-outline.md - Systematic review outline (PRISMA 2020)
templates/declarations.md - Declarations templates (Ethics, COI, Funding, AI, CRediT)
templates/graphical-abstract.md - Graphical abstract design guide
references/ai-disclosure.md - AI tool disclosure guide (ICMJE 2023)
references/tables-figures-guide.md - Tables and figures creation guide
references/keywords-guide.md - Keywords and MeSH term selection guide
references/supplementary-materials.md - Supplementary materials strategy guide
references/citation-verification.md - Citation authenticity verification guide
references/pubmed-query-builder.md - PubMed search query construction guide
templates/title-page.md - Title page template (running head, ORCID, affiliations)
templates/highlights.md - Key Points / Highlights / Summary boxes (JAMA, BMJ, Elsevier, etc.)
templates/limitations-guide.md - Limitations section writing guide with templates
templates/acknowledgments.md - Acknowledgments template (AI tools, medical writing)
templates/proof-correction.md - Post-acceptance proof correction guide
references/submission-portals.md - Submission portal guide (ScholarOne, Editorial Manager, etc.)
references/open-access-guide.md - Open Access models, APCs, preprints, funder mandates
references/clinical-trial-registration.md - Clinical trial registration guide (ClinicalTrials.gov, UMIN-CTR, jRCT)
references/abstract-formats.md - Journal-specific abstract formats (JAMA, NEJM, Lancet, BMJ, etc.)
references/word-count-limits.md - Word count limits by journal and paper type
references/coi-detailed.md - Detailed COI categories, CRediT taxonomy, ORCID guide
references/desk-rejection-prevention.md - Desk rejection prevention and journal selection
references/journal-reformatting.md - Quick reformatting guide after rejection
references/statistical-reporting-full.md - Extended SAMPL statistical reporting guide
references/reporting-guidelines-full.md - Comprehensive reporting guidelines (20+ guidelines with checklists)
references/master-reference-list.md - Master reference list with URLs (all resources)
templates/data-management.md - Data management template (raw/processed/analysis, data dictionary, de-identification)
templates/analysis-workflow.md - Data analysis workflow guide (Table 1, regression, survival, figures)
scripts/table1.py - Table 1 generator (auto-detect variable types, normality test, group comparison)
scripts/analysis-template.py - Statistical analysis template (descriptive, t-test, logistic, survival)